AEC 131A: Food Engineering Laboratory
- Bostwick consistometer
- 4 experimental setups for non-Newtonian pumping analysis
- 2 experimental setups for flat plate heat exchanger analysis
- 6 Scilogex Overhead stirrers, each with 2 L tank, plus 6 different impellers
AEC 131B: Analytical Laboratory
- Scion Instruments 436 GC system
- Shimadzu Organic Analyzer TOC-L
- Agilent 7890A GC system
- Pro Team LC System 210 (prep chromatography)
- Fisher 300 Isotemp oven
- Isotemp refrigerator
AEC 131D: Experimental Design I Laboratory
- Parr 6200 Oxygen Bomb Calorimeter
- Spectronic Genesys 2 Spectrophotometer
- Cannon Fenske viscometry work station with constant temperature bath
- Stokes Law column with constant temperature bath
- Mass Diffusion measurement system with computer controlled data acquisition link
- Efflux time from a draining tank system
- Thermal Conductivity measurement system
- Brookfield DV-II+Pro Viscometer
AEC 131: Unit Operations Laboratory
- Reverse osmosis membrane setup (including pump, piping and holding tank)
- Pipe rack setup
- Heat exchanger setup (including heat exchanger, Pick heater and piping)
- Othmer still setup (including heaters and condensers)
- Bioreactor setup (including impeller and pH probe)
- CSTR setup (including UV-Vis spectrophotometer, two impellers and three pumps)
- Twin column distillation column setup (including various pumps, condensers, piping, kettle heater, heaters and digital control system)
- Packed bed column setup (including heat exchanger, piping compressor, blower and muffler)
- Emerson vacuum pump
- Riehle Charpy Impact Tester (stored for ES 231 teaching)
- Millipore Elix 10 Water deionization system
AEC 202: Thermophysical Properties Laboratory
- PerkinElmer DSC 8000 with Intracooler 2 unit
- Mettler Toledo HS-80 Hot Stage with liquid nitrogen dewar
- Leica DM2700P Polarized Optical Microscope
- Waters Alliance HPLC/GPC/SEC system
- Discovery HR-1 hybrid rheometer
- Ultimaker 2 3D Printer (1)
AEC 218: Polymer Synthesis Laboratory
- TA Instruments Q800 DMA with Gas Cooling Accessory
- TA Instruments Q500 TGA with Autosampler
- Thermo Fisher Scientific iS50 FTIR with ATR attachment
- Malvern Instruments Zetasizer ZS with Autotitrator
- Genesys 10S UV-VIS spectrophotometer with * Air-cooled Single Cell Peltier Holder
- Cell-scale biaxial materials testing apparatus
- FormLabs Form2 SLA 3D printer
AEC 232: Center for Molecular Bioengineering
- Applied Biosystems Real-time RT-PCR suite
- Nanodrop 1000 spectrophotometer
- Nikon C1Plus Confocal with 4 lasers on the TiE inverted microscope
- Biotek microplate reader
- Protein electrophoresis suite
- Licor C-Digit Chemiluminescent Western Blot scanner
- Polymer electrospinning apparatus
- ThermoScientific Sorvall Legend X1 Centrifuge
- FisherScientific Sonic Dismembrator Model 500
- ThermoScientific Genesys 10S UV-VIS Spectrophotometer
- MaxQ 4450 Benchtop Orbital Shaker Incubator
AEC 233A: Micro/nanofabrication Laboratory
- Phenom ProX Scanning Electron Microscope
- FisherScientific Isotemp Oven
- Denton Vacuum Spin Coater
- Motic 101M Stereo Microscope
- Plama-Etch PE-50 Plasma System
- OAI Model 30 UV Light Source
- Multimode Force Microscope Digital Instruments/Veeco, NanoScope IIIa software with 10 and 125 micron scanners
AEC 233B: Environmental Engineering Laboratory
- LC/SFC-MS Waters XevoTQD with Acquity UPC2 and UPLC I-Class (Hugel)
- Supercritical Fluid Technologies High Pressure Reactor (100mL)
AEC 233C: Interfacial Laboratory
- Parker Hannifin HPZA-30000 Zero Air Generator, 30LPM capacity
- MKS Gas Mass Flow Controller (2x 5LPM, 1x 50 cc/min, 1x 200cc/min, 2x 15LPM) with 4-channel power supply/setpoint module
- Sinterface PAT-1D profile analysis tensiometer
- Sinterface PAT-1 profile analysis tensiometer
AEC 233: Unit Operations Laboratory
- ChemGlass Continuous Stirred Tank Reactor
- Fluidized Beds experimental setups (4)
- Plas Labs Controlled Atmosphere Chamber
- Ultimaker 2+ 3-D Printers (2)
AEC 235: Mammalian Tissue Culture Laboratory
- Nikon TS100-F Microscope
- Sterile Mammalian Cell Culture Suite, with incubators and laminar flow hood, -80oC freezer
- VI-CELL cell viability analyzer